Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the Pocket Rocket is 95 percent assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 15 minutes for assembly, not including initial charge time.
Allow up to 18 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
2
WARNING:
Do not use your Pocket Rocket
for the first time until you have
charged the battery for at least
18 hours. Failure to do so may
damage your product and void
your warranty.
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR RAZOR
POCKET ROCKET. The Pocket
Rocket has been built to certain
Razor design specifications. The
original equipment supplied at
the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may or may not be
compatible.
Required Tools
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
5mm and 6mm
hexagonal key wrenches
(Included)
2.5 mm hexagonal key
wrench
(Not Included)
Bicycle-style tire pump for
Schrader valve tires, with
pressure gauge
(Not Included)
8mm, 10mm and 17mm
wrenches
(Not Included)
Phillips screw driver
(Not Included)