Filter
Top Products
24
Red Flasher Bulb
1. Press the head cap release button, then remove the head
cap, yellow ring, and red flasher cover.
2. Unscrew the bulb, remove it, and replace it with a new 9
volt, 0.3 amp bulb.
3. Insert the red flasher cover’s tab into the slot in the case
and replace the cover.
4. Replace the yellow ring and the head cap.
Amber Flasher Bulb
1. Open the battery compartment cover and remove the bat-
teries, if necessary.
2. Use a Phillips screwdriver to unscrew the two screws,
then lift off the end cap.
3. Pull off the yellow ring and amber flasher cover.
4. Unscrew the bulb and replace it with a new 9 volt, 0.3 amp
bulb.
5. Insert the amber flasher cover’s tab into the slot in the
case and replace the cover.
6. Replace the yellow ring.
7. Align the screw holes in the end cap with those in the
case, replace the end cap, and secure it with the screws.
22-1698.fm Page 24 Friday, August 6, 1999 11:32 AM