Filter
Top Products
23
REPLACING THE BULBS
Fluorescent Lamp
1. Press the head cap release button, then remove the head
cap, yellow ring, and transparent cover.
2. Twist both metal end caps on the tube so the pins line up
with the slots in the bulb holders, then remove the tube.
Caution:
Twisting the tube itself could break the tube and
cause injury.
3. Replace the tube with a new 9-inch 6-watt tube.
4. Replace the transparent cover, yellow ring, and head cap.
Torch Bulb
1. Press the head cap release button, then remove the head
cap.
2. Pull out the bulb and replace it with a new 8.63 volt, 0.5
amp bulb.
3. Replace the head cap.
22-1698.fm Page 23 Friday, August 6, 1999 11:32 AM