Python 871XP Automobile Alarm User Manual


 
29
© 2005 directed electronics—all rights reserved
To turn the rear defogger output ON:
1. Simultaneously press & release the + +
buttons on the remote control.
2. The lights will flash 3 times.
3. The rear defogger output will once again activate when the
vehicle is remote started.
AAuuxxiilliiaarryy OOuuttppuuttss ((OOppttiioonnss))
This system also supplies outputs that can control convenience
options such as remote control trunk release and window automa-
tion. Consult your dealer for available options for your system.
Channel 2 Trunk release: When connected, pressing for 1.5
seconds will remotely release the vehicle trunk lid.
Channel 4 auxiliary output: When connected, pressing and
will immediately activate this output to control an
additional convenience option.
Channel 5 auxiliary output: When connected, pressing and
will immediately activate this output to control an
additional convenience option.
nnoottee::
If the remote start is on the lights will turn off
then flash 3-times before returning to their normal
output and the defogger output will activate as
programmed.
.