Filter
Top Products
25
© 2004 directed electronics, inc.
oowwnneerr rreeccooggnniittiioonn
Owner Recognition is a feature available exclusively from
Directed. Using the Directed Bitwriter, a hand-held program-
ming tool, your dealer can program many of the system settings.
The programmer makes it possible to program different settings
for each 2-way remote that is used with the system. Then, when-
ever a specific 2-way remote is used, the system will recall the
settings assigned to that 2-way remote. Owner Recognition lets
up to four users of the system have different settings that meet
their specific needs. It is almost like having four separate alarms
in your vehicle, one for each user.
rraappiidd rreessuummee llooggiicc
This Directed system will store its current state to non-volatile
memory. If power is lost and then reconnected, the system will
recall the stored state from memory. This means if the unit is in
Valet
®
Mode and the battery is disconnected for any reason, such
as servicing the car, when the battery is reconnected the unit will
still be in Valet
®
Mode. This applies to all states of the system
including arm, disarm, VRS
®
, and Valet
®
Mode.
note: Owner Recognition cannot be programmed with-
out a Directed Bitwriter and the necessary software.
Check with your dealer for more information.