Python 671XP Automobile Alarm User Manual


 
13
© 2004 directed electronics, inc.
multi-level security arming
Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be
bypassed when the system is armed. (See
Table of Zones
section
of this guide.) Pressing (only in Standard Configuration)
again within five seconds of arming the system will activate the
Multi-Level Security feature. Each time is pressed again, a
different security level is selected. The different security levels are
selected as follows:
Press once: The siren chirps once. The system is armed.
Press a second time within five seconds: The siren
chirps twice followed by a long chirp. Zone 2 is now
bypassed.
Press a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone 4 is now
bypassed.
Press a fourth time within five seconds: The siren chirps
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
Press a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.