24
© 2008 Directed Electronics. All rights reserved.
To exit timer mode without the transmitter:
Make sure the remote start system is not operating the engine.1.
Turn the ignition on. Timer Mode is exited and the parking lights flash 2.
slowly four times.
Note:
The Bitwriter can change the amount of times the remote start activates
and, it can change the intervals between activations in timer mode.
➤ Turbo timer mode
Turbo timer mode keeps the engine running after arriving at your destination
for a programmable period of 1, 3, 5 or 10 minutes. This allows the system’s
timer to conveniently cool down the turbo after you have left the vehicle.
To activate turbo timer mode with automatic transmission:
Make sure turbo timer is turned on.1.
Open the vehicle door.2.
While the vehicle is running, press 3. button 2-times, and then press
A U
X
button. The parking lights flash one-time confirming that the remote start is
activated.
Turn Off the ignition. The car remains running. 4.
Exit the vehicle and Lock the system. The vehicle remains running for the 5.
programmed run time.