Python 1401 Automobile Electronics User Manual


 
20
© 2008 Directed Electronics. All rights reserved.
Overriding the optional starter kill
To bypass the optional starter kill without a remote control:
Use your override switch located on the control center (see diagram below) to
bypass the system. This switch bypasses the system only if you have the vehicle
key.
To check proper operation:
While the vehicle is locked, open the door. Immediately insert the key 1.
into the ignition and turn it to the Run or On position. (all the indicators in
the dash turn on)
Press and release the Override Switch one time. The LED on the control 2.
center will stop flashing and the optional starter kill is bypassed. You can
now start the vehicle with the key.
Note: The override switch feature allows you to select a specific number of
presses needed to disable the system. If the override switch has been pro-
grammed to a new number of presses by your authorized dealer, that number
should be indicated below.
Override Switch number of presses ________