Pride Mobility none Automobile Accessories User Manual


 
14 Basic Operation Instructions
Europa Controller www.pridemobility.com
POWER ACCESSORY CONTROL
The Europa can support the control of up to five power accessory actuators once
the actuator control module is correctly configured. Power accessory actuators
are selected and controlled using the joystick.
To select a power accessory actuator:
1. Press the drive program select key until the 7-segment display displays A.
NOTE: The power chair will not drive in this mode.
2. Move the joystick left or right to move through the available actuators. Release
the joystick to select the desired actuator.
NOTE: The actuators are represented on the 7-segment display as a mix-
ture of uppercase and lowercase letters, which follow the sequential order
of the actuators, e.g., Actuator 1 is represented as A and Actuator 5 as
E. If your controller was programmed to operate a lighting package, a
sixth option L will be displayed.
3. Push the joystick full forward or full reverse to control the actuator adjustment.
NOTE: When using the Europa in conjunction with a TRx Seating Sys-
tem, give a reverse command to extend the actuator, release the joystick,
then give another reverse command to retract the actuator. The reverse
command toggles between extend and retract only for TRx units. If you
experience any problems with the operation of your TRx Seating System
or your power chair, contact your authorized Pride Provider.
4. Resume driving by moving the joystick back to neutral and selecting a drive
program.
BATTERY SAVER FEATURE
When the battery capacity drops to below 21V (typically two lights), the control-
ler will reduce power chair performance to conserve battery power.