Filter
Top Products
Basic Operation Instructions 13
www.pridemobility.com Europa Controller
Drive Program Select Key
The drive program select key enables you to select a drive program and a power
accessory mode. Your Europa Controller was preprogrammed for five drive pro-
grams— 1 (slowest) to 5 (fastest). The drive mode is indicated by a number in the
center of the keypad (drive mode and actuator display).
NOTE: The drive mode settings are preset at the factory. If your autho-
rized Pride Provider changes these settings, please make note of these
changes.
To change the drive program:
1. Press the drive program select key until your desired drive program is displayed.
2. Use the joystick to operate your power chair.
Drive Mode and Actuator Display (also status display)
This is a 7-segment light that displays the drive program. It also displays a drive
inhibit and actuator mode (if applicable), when they occur.
Actuator Select Keys with Lights
If your power chair is equipped with power accessories such as a power seat or
power elevating leg rests, you can operate them through the keypad. Refer to
“Power Accessory Control.”
Horn Key
The horn key activates a warning horn.
CONTROLLER COMMUNICATIONS CONNECTOR
This connects the Europa to the power chair’s batteries, motors, and motor brakes.
OFF-BOARD CHARGER SOCKET
You may use an off-board charger to charge the power chair batteries through
the 3-pin socket located on the front of the Europa (see figure 1). If you use an
off-board charger, the charger current should not exceed 8 amps. Contact your
authorized Pride Provider for more information.