Porter-Cable PCI2200 Automobile Parts User Manual


 
30- ENG
CODE POSSIBLE CAUSE POSSIBLE SOLUTION
 Faulty spark plug Replace spark plug
18 Spark plug cap loose Attach spark plug cap securely
19 No or low compression Tighten spark plug. If problem is not

factory service center or a PORTER

20 No spark 
is not corrected, contact a

21 Spark plug fouling is
sooty or sticky black
 Spark
Plug under Maintenance.
 
if needed. See Spark Plug
under Maintenance.
c. Replace spark plug. See
Specifications.
d. If engine still fails to start, con-

22 Dirty air filter 
23 Improper valve clearances 

24 Governor linkage stuck or bent 
 Throttle shaft stuck 
26 Governor spring bent or lost 
 Dirty carburetor 