Porter-Cable PCG6500 Automobile Parts User Manual


 
3 - ENG
RISK OF ELECTROCUTION AND FIRE
WHAT CAN HAPPEN HOW TO PREVENT IT
     
building’s electrical system to the out-
side utility feed lines could endanger
repair persons attempting to restore
service.
   
a structure's electrical system.
 
utility service could result in electrocu-
tion.
 
the generator is connected to the
incoming utility could result in a fire
or serious damage if a double throw
transfer switch is not installed.
 
switch when connecting to a struc-
ture's electrical system can damage
appliances and WILL VOID the manu-
facturer's warranty.
 -
cal system in a safe manner, always
have a double-throw transfer switch
installed by a qualified electrician
and in compliance with local ordi-
nances. (When installing a double-
throw transfer switch, a minimum of
10 gauge wiring must be used.)
     
which comes in contact with electri-
cally charged components can trans-
mit electricity to the frame and other
surfaces, resulting in electrical shock
to anyone contacting them.
     
well ventilated area. Make sure
hands are dry before touching unit.
 -
sion cords could result in electrocu-
tion.
    
use and replace with new cord if
required.
     
could result in overheating of the wires
or attached items, resulting in fire.
 -
sion cord(s) for application; see
Use of Extension Cords under
Assembly.
 
could prevent operation of cir-
cuit breakers and result in electrical
shock.
     
having a grounding wire with an
appropriate grounding plug. DO
NOT use an ungrounded plug.
 
could charge conductive surfaces in
contact with the generator.
 
surface such as a concrete slab.
ALWAYS operate generator a mini-
mum of 6' (1.8 m) from any conduc-
tive surface.
      
generator by attaching too many
items, or items with very high load rat-
ings to it could result in overheating of
some items or their attachment wiring
resulting in fire or electrical shock.
 Operating Heavy Loads under
Operation. Make sure that the
summation of electrical loads for all
attachments does not exceed the
load rating of the generator.