Pontiac Vibe Navigation System Supplement GPS Receiver User Manual


 
1-13
Language
Your vehicle has been set for the English language, but
you may also select French for all instructional text and
voice prompts. However, names on the location map
when using the navigation functions will not change.
If you wish to change the language, do the following:
1.Press the Language key under the Setup Menu, a
caution will display.
2.Use the control pad to toggle to the language
you prefer.
3.Press the ENT button in the center of the control pad
to choose a language.
4.Select I AGREE to change the display back to the
map display.
If the language is changed from English, the menu
screens will not match word
-for-word as they appear in
this supplement. If you accidentally set a language and
you do not understand the menus, turn your engine off.
Your Navigation System will turn off. You will then be
able to select a different language when the system starts
up again, using the control pad to select the language.
English/Metric Units
You can select either English or metric measurements to
appear for distances on the map.
To change between English and metric measurements,
do the following:
1.Press the MENU button.
2.Press Setup on the menu display.
3.Choose from the measurement options listed:
kilometer/meter.
4.Use the control pad to move to the measurement
option you desire. Press the ENT button in the center
of the control pad to choose it.
5.Press the Back key to return to the previous screen.