Filter
Top Products
4. With the valve stem up, place the tire on the
compartment floor with the rear of the tire beneath
the trim panel. The tire may not lay completely flat.
5. Line up a the wheel center hole or a wheel nut hole
with the bolt.
6. With the cap in place to prevent the wheel from
being scratched, screw the bolt extension onto
the bolt through the wheel hole aligned with the bolt.
7. Remove the yellow cap from the bolt extension.
8. Secure the tire and wheel with the larger wing nut.
A. Cover
B. Wing Nut
C. Flat Tire (valve stem
up) or Compact
Spare Tire
D. Extension
E. Nut
F. Jack
G. Bolt
The compact spare is for temporary use only. Replace
the compact spare tire with a full-size tire as soon
as you can. See Compact Spare Tire on page 5-99.
5-97