Filter
Top Products
2. Check to see that the CD changer is not in song list
mode. S-LIST should not display. If S-LIST is
displayed, press the
R button to turn it off.
3. Select the desired CD by pressing the numbered
pushbutton and then use the up SEEK arrow to
locate the track to be saved. The track begins
to play.
4. Press and hold the song list button for two or
more seconds to save the track into memory.
When song list is pressed, one beep sounds. After
two seconds of pressing song list continuously,
two beeps sound to confirm that the track has been
saved and TRACK number ADDED displays.
5. Repeat Steps 3 and 4 for saving other selections.
SONG LIST FULL displays if more than 20 selections
are saved.
To play the song list, press the song list button. One
beep sounds and SONG LIST displays. The recorded
tracks begins to play in the order that they were saved.
Seek through the song list by using the SEEK arrows.
Seeking past the last saved track returns the song list to
the first saved track.
To delete tracks from the song list, perform the following
steps:
1. Turn the CD player on.
2. Press the
R button to turn song list on. SONG
LIST displays.
3. Press the SEEK arrows to select the desired track
to be deleted.
4. Press and hold the song list button for two seconds.
When song list is pressed, one beep sounds. After
two seconds of continuously pressing the song
list button, two beeps sound to confirm that the track
has been deleted and TRACK number DELETED
displays.
After a track has been deleted, the remaining tracks are
moved up the list. When another track is added to
the song list, the track is added to the end of the list.
To delete the entire song list, perform the following steps:
1. Turn the CD player on.
2. Press the
R button to turn song list on.
S-LIST displays.
3. Press and hold this button for more than
four seconds. A beep sounds, followed by two beeps
after two seconds, and a final beep sounds after
four seconds. SONG LIST EMPTY displays
indicating that the song list has been deleted.
3-64