Polaris TM 2X4 Automobile User Manual


 
89
MAINTENANCE AND LUBRICATION
Seat Belts
Inspect all three seat b elts for proper o peration b efore each use o f the
vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it’s
securely latched.
2. Push the red button in the middle of the buckle to make sure it
releases freel y.
3. Check the belt webbing for wear, cuts or damage. If any
irregularities are found, have the seat belt system checked and/or
replaced by an authorized Polaris dealer.
The RANGER s eat belt is adjustable and
should be adjusted for both the operator
and passenger before driving. Although
having the belt at 30° i s typical fo r many
people, it will not accommodate all body
sizes an d shapes. Make sure the s eat belt
is adjusted to the lowest possible lap
position before riding.
1. To adjust, loosen the bolts (1).
2. Reposition both the buckle and
retractor. Tighten the bolts.
NOTE: The c enter belt does not s elf
adjust. Before riding, pull on the
strap to secure t he belt on the lap
of the center passenger.
WARNING
Failure to follow the age recommendations for this vehicle could
result in serious injur y or death. No one under t he age of 16 may
operate this vehicle. No one under the age of 5 may ride as a
passenger in this vehicle.
1