100
MAINTENANCE AND LUBRICATION
Battery
Battery Installation
1. Set the battery in its holder.
2. Install the battery vent tube. It must be free from obstructions and
securely installed. If n ot, battery g ases could accumulate an d cause
an explosion. The tube should be routed away from the frame and
body to prevent corrosion. Avoid skin contact with electrolyte as
severe burns could result.
3. First connect and tighten the red (positive) cable.
4. Second co nnect an d tighten the black (n egative) cable.
5. Verify that cables are properly routed.
NOTE: When ins talling a new battery, make sure it’s fully charged
prior to its initial use. Using a new battery that has not been
fully charged can damage the bat tery and result in a shorter
life. It can also hinder vehicle performance.
Battery Storage
When the vehicle is p laced in s torage for three months or more, the
battery should be removed, stored out of the sun in a cool, dry place
and tested monthly. Before reusing, take the battery to your dealer for
testing and recharging.