Filter
Top Products
1
2
AWD
D
E
F
2WD
A
B
C
4
3
30
FEATURES AND CONTROLS
Ignition Switch (1)
The ignition switch is a three-position, key-operated switch. The key
can be removed from the switch when it is in the OFF position.
OFF The engine is off. E lectrical circuits are off, except Acc. 12V.
ON Electrical circuits ar e on. Electrical equipm ent can be used.
START Turn the key t o the START position to engage the electric
starter. The key returns to the ON position when released.
WARNING
Leaving the keys in the ignition c an lead to unauthorized use of
the v ehicle resulting in s erious injury or death. Always r emove
the ignition key when the v ehicle is not in use.
Light Switch (2)
The ignition switch key must be in the ON position to operate the
headlights. The switch has three positions:
A: High Beam B: Low Beam C: Off
AWD/Differential Lock Switch (3) (2X4, 4X4)
The AWD/Differential Switch has three positions:
D: AWD (4X4 only) E: 2WD/Differential Lock F: Off
See page 50 for AWD operating instructions. See page 49 for
differential operating instructions.
Differential Lock Lever (4) (TM)
To lock the differential on the TM, push the lock lever up. See page 49
for differential operating instructions.