Filter
Top Products
90
Features and Controls
Kick-Start Lever
If the battery becomes too weak to start the engine, the
kick-start lever will allow you to start the engine until the
battery is serviced. Be sure the ATV is on a level surface
with the parking brake locked.
1. Fold out the kick-start lever (A) on the lefthand side of
the ATV.
2. Make sure the stop switch is in the RUN position and
turn the key to ON.
3. Place your foot on the kick-start, and then thrust your
heel downward to crank the engine.
4. After the engine has started, fold the kick-start lever back
into place. NOTE: A 10/12mm wrench is provided in
the tool kit for removing or installing the lever. If not
installed, make sure the rubber cap is installed on the kick-start shaft to protect the
rider. On 50cc models, store the kick-start lever under the seat (B) when it’s not
installed on the ATV.
A
B