Filter
Top Products
82
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Item Lube Method Frequency
(6) Demand 4
Hubs - All
Wheel Drive ATVs
Premium
Hub Lube
Remove set screw in hubs. Rotate
wheels to 4 O’clock position. I f lubri-
cant is not visible add more. Reinstall
set screw.
Annually or at
100 hrs.
(7) Front Drive
Axle (U Joint)
(AWD Models)
FGrease Locate grease fitting and grease with
grease gun.
Every 3
months or 50
hours
(8) Ball Joint
"L
Grease
Locate fitting on back side of struts
and grease with grease gun.
Every 3
months or 50
hours
(9) Counter
Balance Housing
(400)
Polaris
Premium
Synthetic
4-cycle or
SAE 10/30
Check level on dipstick and add oil as
necessary . Change annually.
Check
monthly and
change
annually
(10) Rear Axle
Bearing
"L
Grease
Locate fittings and grease Every 3
months or 50
hours
(11) Swing Arm
Bushings
"L
Grease
Locate fittings on swing arm and
grease with grease gun.
Monthly or at
20 hours
(12) Upper Con-
trol Arms
"L∆
Grease
Locate fittings and grease Semi-annually
(13) Lower Con-
trol Arms
"L∆
Grease
Locate fittings and grease Semi-annually
(14) Rear Wheel
Hub Bearing Car-
rier
"L∆
Grease
Locate fitting and grease Semi-annually
(15) Rear Anti-
Roll Bar
"
Grease
Locate fitting and grease Semi-annually
" More often under severe use, such as wet or dusty conditions
L Polaris Premium All Season Grease or grease conforming to NLGI No. 2, such
as Conoco Superlube M or Mobilegrease Special
F Use Polaris Premium U-Joint Lube every 500 miles, before long
periods of storage, or after pressure washing or submerging.
∆ When suspension action becomes stiff, or after washing