Filter
Top Products
53
FEATURES
Instrument Cluster
Rider Information Center
The rider information center has 4 standard modes:
Mode 1 - Odometer
Mode 2 - Tripmeter
Mode 3 - Total Service Hours
Mode 4 - Programmable service interval
The reverse override button on the left handlebar is also the mode
button. NOTE: If using the mode button to program the rider
information center, or to toggle through the options, the machine
cannot be in reverse.
Mode 1 - Odometer
The odometer records the miles traveled by the ATV.
Mode 2 -Trip Meter
The trip meter records the miles traveled by the ATV on each trip if it’s
reset b efore each trip. To reset the trip meter , select the trip meter
mode. Press and hold the mode button (override button) until the total
changes to 0 . NOTE: In the Rider Information Center, the trip meter
display contains a decimal point, but the odometer displays without a
decimal point.
Mode 3 - Hour Meter
This mode logs the total hours the engine has been in operation.