Filter
Top Products
40
FEATURES
Instrument Cluster
Rider Information Center
Security System (Ignition Lock System)
Unlocking the System With Your Personal Security Code
1. When the engine is running, the display will
alternate between SECURE ON and
ENTER. Wait until ENTER displays, then
press and release SET to advance the digit.
When the first digit of your security code is
displayed, press and release MODE to
accept the digit.
TIP:When the system is locked and engine temperature is above 120° F (49°
C), the correct password must be entered within 60 seconds or the engine
will shut down.
2. Continue to use SET and MODE to select
and accept the remaining two digits of the
code.
3. After accepting the third digit, view the dis-
play screen. SECURE OFF displays if the
system unlocks.
4. Re-enter your code if BAD CODE displays.
NOTE: The system is now unlocked.