Filter
Top Products
42
FEATURES AND CONTROLS
Automatic Transmission Gear Selector
The transmission gear selector (1) is located on the right side of the
vehicle.
H: High Gear
N: Neutral
L: Low Gear
R: Reverse
P: Park
To shift into HIGH or PARK,
you must first apply the
auxiliary brake to activate the
high/park lock-out mechanism.
When shifting out of HIGH or PARK, it’s not necessary to apply the
brake.
CAUTION
Shifting gears with the engine speed above idle or while the
vehicle is moving could cause transmission damage.
To change gears, stop the vehicle, and with the engine idling,
move the lever to the desired gear. Apply the auxiliary brake if
shifting into HIGH or PARK.
Whenever the ATV is left unattended, always place the transmission in
PARK and lock the parking brake.
Belt L ife
To exte nd belt life, use low f orw ar d gea r in heavy pulling situations and
when oper ating at less than seven miles per hour for extended per iods of
time. If towing the vehicle is necessary, shift the transmission into
neutral for better mobility and to prevent damage to the belt.
1
H
N
P
L
R