Filter
Top Products
A
101
MAINTENANCE
Lubrication
Gearcase Oil
Oil Change
The drain plug (A) is located on the
bottom of the gearcase.
NOTE: Polaris does not recommend
tipping the snowmobile onto
it’s side for service. Any time
the snowmobile is tipped onto
it’s left side, always check the
oil level and clean the foam oil
breather element. See page
97.
1. Position the vehicle on a level
surface.
2. Remove the drain plug and drain
the oil into a drain pan. Allow
the oil to drain completely
NOTE: Thesealingsurfaceson
the drain plug and the
gearcase should be clean
and free of burrs, nicks or
scratches.
3. Reinstall t he drain plug. Torque to 6-10 ft. lbs. (8-13 Nm).
4. Remove the dipstick.
5. Add 9 oz. (266 ml) of the recommended oil. Do not overfill.
6. Reinstall the dipstick, making sure it is seated properly.