Filter
Top Products
92
MAINTENANCE
General Maintenance
Clutch Alignment and Offset
Clutch cen ter distance and alignment (A) are
crucial to maintaining optimum performance.
See the specifications section on p age 112 for
the recommended of fset between the drive
and driven clutches with the belt removed.
The drive belt is a very important part of the drive
system. Belt w idth an d length must match the
center distance of the clutches and sheave width o f
the drive clutch. For this reason, Polaris
recommends that only O.E.M. belts be used.
Other belts may match the dimensions, but can
drastically change the shift pattern, resulting in
poor performance. See your dealer for service and
adjustments.
NOTE: A worn belt will continue to function,
but will not deliver maximum performance. Al-
ways carry a s pare belt in case of an emergency.
Clutching Chart
Altitude
Meters (Feet)
Shift
Weight
Drive
Clutch
Spring
Driven
Clutch
Spring
Driven
Helix
Chaincase
Gearing
0-900
(0-3000)
10-62 Yellow Silver #2 R-11 20:41
900-1800
(3000-6000)
10-62 Yellow Silver #2 R-11 20:41
1800-2700
(6000-9000)
10-58 Yellow Silver #2 R-11 19:41
2700-3700
(9000-12000)
10-58 Yellow Silver #2 R-11 19:41
A