Filter
Top Products
117
TROUBLESHOOTING
Engine Troubleshooting
Problem Probable Cause Solution
Noise in drive
system
Broken drive clutch
components
Bearing failure/
chaincase, jack-
shaft, or front drive
shaft
Drive belt surface
flat spots
Drive chain loose
or worn, sprocket
teeth broken
-SEE YOUR DEALER.
-SEE YOUR DEALER.
-Inspect and replace if necessary.
-Inspect and adjust or replace.
Poor low RPM
performance
Worn drive belt
Excessive belt/
sheave clearance
Loose torque stop
Sticky clutch
-Inspect and replace if necessary.
-SEE YOUR DEALER.
-Inspect and adjust.
-SEE YOUR DEALER.
Engine doesn’t
start (electric
start models)
Wire connections -SEE YOUR DEALER.
Engine doesn’t
turn over
Seized engine
Dead battery
-SEE YOUR DEALER. S eizure is a result of
poor lubrication, broken parts, or improper
cooling.
-Recharge battery or replace with new.