Filter
Top Products
52
THE PERFECT FIT
FAST M-10 Rear Suspension Adjustments
Ski Pressure
Ski pressure is set at the factory to deliver the optimum balance
between ride and handling. If a rider prefers more ski pressure for
improved steering performance, adjustments can be made to the front
limiter strap and front arm mount.
1. Determine if the rider
prefers comfort or
control. Lean toward the
#4 setting for comfort
and toward the #3
setting for aggressive
riding.
2. For full hole
adjustments,
remove the 5/16”
nut and flat washers
from the lower
attachments of the
limiter straps and relocate
the straps to the desired position
(i.e. move from position 4 to 3). Replace the nut and washer.
Tighten securely.
3. For half-hole increments (such as 3/4), the limiter straps have slots
at the upper pinch bolt. These slots allow the bolts to be loosened
(rather than removed) for half--step adjustments. Re--tighten the
pinch bolts.
4
3
2
1
3
4
2