Polaris 500 2X4 International Offroad Vehicle User Manual


 
74
MAINTENANCE
Cooling System
Radiator Coolant
To ensure that the coolant maintains its ability to protect the engine,
Polaris recommends that you drain the system completely every two
years and add a fresh mixture of antifreeze and water.
Replace the coolant any time the cooling system has been drained for
maintenance or repair. If the recovery bottle has run dry, check the level
in the radiator. Add coolant as needed.
CAUTION! Escaping steam can cause burns. Never remove the pressure cap
while the engine is warm or hot. Always allow the engine to cool before
removing the pressure cap.
1. Remove the front panel to
access the radiator pressure
cap.
2. Remove the pressure cap.
3. If coolant is low, use a fun-
nel and slowly add coolant
through the radiator filler
neck.
4. Reinstall the pressure cap.
Use of a non-standard pres-
sure cap will not allow the
recovery system to function properly. Contact your dealer for the
correct replacement part.
5. Secure the front panel.
6. Fill the coolant recovery bottle to the upper mark on the bottle.
7. Check the coolant level in the bottle frequently, adding coolant as
needed until the level stabilizes.
Radiator Cap