Polaris 500 2X4 International Offroad Vehicle User Manual


 
33
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 25
64
Brake fluid Ensure proper level 63
Auxiliary Foot brake Ensure proper operation 27
Front suspension Inspect, lubricate if necessary 55
Rear suspension Inspect, lubricate if necessary 55
Steering Ensure free operation -
Tires Inspect condition and pressure 77
Wheels/fasteners Inspect, ensure fastener tightness 77
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 28
56
Coolant level Ensure proper level 73
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 24
67
Indicator lights/switches Ensure operation 22
Engine stop switch Ensure proper operation 22
Drive chain Check condition/slack, lubricate as
needed
70
Air filter, pre-filter Inspect, clean 80
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
23
75
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
76
Riding gear Wear approved helmet, goggles, and
protective clothing
8