Polaris 500 2X4 Automobile User Manual


 
72
MAINTENANCE AND LUBRICATION
Cooling System (2X4, 4X4)
Operation
The engine coolant level is controlled or maintained by the recovery
system. The recovery system components are the overflow bottle,
radiator filler neck, radiator pressure cap and connecting hose.
As coolant operating temperature increases, the expanding (heated)
excess coolant is forced out of the radiator, p ast the p ressure cap , and
into the overflow bottle. As engine coolant temperature decreases, the
contracting (cooled) coolant is drawn back up from the tank, past the
pressure cap, and into the radiator.
NOTE: Some c oolant level drop on new vehicles is nor mal as t he
system is purging itself of trapped air. Observe coolant
levels and maintain as recommended by adding coolant to
the overflow bottle.
Adding or Changing Coolant
To ensure that the coolant maintains its ability to protect the engine, we
recommend that t he system be completely drained every two years and
a fresh mixture of antifreeze and water added. Polaris r ecommends the
use o f Polaris Premium 60/40 anti-freeze/coolant or a 50/50 mixture of
high quality aluminum compatible anti-freeze/coolant a nd distilled
water. Polaris Premium 60/40 is already premixed and ready to use.
Do not dilute with water. See page 101 for the part numbers of Polaris
products.
NOTE: Always follow the m anufacturer’ s mixing r ecommendations
for the freeze protection r equired in your area.
Any time the cooling system has been drained for maintenance or
repair, replace the coolant. If the recovery bottle has run dry, the level
in the radiator should be inspected. Add coolant as needed.