Polaris 500 2X4 Automobile User Manual


 
97
MAINTENANCE AND LUBRICATION
Removal from Storage
1. Check the battery electrolyte level and charge the battery if
necessary. Install it in the vehicle. Make sure the battery vent hose
is routed properly and that it’s not pinched or restricted in any way.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section
on page 33.
NOTE: T ightness of the bolts, nuts and other fasteners should be
checked by an authorized P olaris dealer .
5. Lubricate at the intervals outlined in the Periodic Maintenance
Chart beginning on page 53.
WARNING
Engine exhaust contains poisonous carbon monoxide and can
cause loss of consciousness or death. Never r un an engine in an
enclosed area.