Filter
Top Products
110
MAINTENANCE
General Maintenance
Clutch Alignment Offset
Clutch center distance and align-
ment (✪) are crucial to maintain-
ing optimum performance. See
your Owner's Manual Supplement
for the recommended offset
between the drive and driven
clutches with the belt removed.
Belt width and length must match
the center distance of the clutches
and sheave width of the drive
clutch. For this reason, Polaris
recommends that only O.E.M.
belts be used. Other belts may
match the dimensions, but can
drastically change the shift pat-
tern, resulting in poor perfor-
mance. See your dealer for
service and adjustments.
NOTE: A worn belt will continue
to function, but will not
deliver maximum perfor-
mance. Always carry a
spare belt in case of an
emergency.
Clutch Center Distance
See your Owner's Manual Supplement for recommended center distance
for your machine. If adjustment is necessary, see your dealer.
✪