Filter
Top Products
31
FEATURES
Fuel Type Selection
Whenever using ethanol, MTBE or other forms of oxygenated gasoline,
the fuel type designation setting must be changed to “Eth” in the gauge.
When using the recommended 91 non-ethanol gasoline, always select
the “91-non” setting. Whenever in doubt of your fuel purchase, use the
“Eth” setting as a safeguard.
Interactive Digital Display (IDD)
If your model is
equipped with the
interactive digital display
(IDD), please see your
IDD Owner’s Manual for
fuel type selection
procedures.
Standard Instrument Cluster
Use the following procedure to change the fuel type designation in the
standard instrument cluster. Refer to the fuel type selection label located
inside the left side panel.
1. Start the engine. Lock the parking brake.
2. Press and release the
SELECT button or SET
switch until “FUEL” is
displayed in the lower
section of the gauge.
3. Press and hold the
SELECT button or SET
switch until the desired
fuel type is displayed in
the center of the screen.
Fuel
Selection
Fuel Type Selection Label
Step 2 Step 3