Open as PDF
To help you perform routine maintenance, a tool kit is provided in the storage
compartment under the seat. Items included in the kit are:
D open end wrench (8-10 mm)
D open end wrench (12-14 mm)
D tire pressure gauge
D spark plug wrench and handle
NOTE: Other tools are also necessary to perform maintenance work. They are
called out later in this manual.
The PVT system rotates at high speeds, creating large amounts of force
on clutch components. Extensive engineering and testing has been con-
ducted to insure the safety of this product. However, as the owner you
have the following responsibilities to make sure this system remains safe:
D Do not modify any component of the PVT system. Doing so may reduce
its strength so that a failure may occur at high speeds. This system has
been precision balanced. Any modification will cause the system to be
out of balance, creating vibration and additional loads on components.
D Routine maintenance is the responsibility of the owner. Always follow
recommended maintenance procedures. See your dealer!
D This PVT system is intended for use on Polaris products only.
D The PVT housing must be securely in place during operation.
Failure to comply with this warning can result in severe injury or death.