Filter
Top Products
6
Chapter 1
How to Use Remote Control and Names of Parts
Getting to Know the Compo-
nents and What They Do
Before using this unit, get to know the name of
each component and how it is used.
The Steering Remote Control
Operation mode
By switching the Operation mode (Main mode,
DIN mode, Navigation mode) you can use one
remote control to operate different equipment.
Main mode :
Operates Pioneer AV Head Unit (including AVH-
P7600DVD, AVH-P5700DVD, AVH-P7500DVD,
AVH-P6500DVD, AVH-P6600DVD etc.)
DIN mode :
Other Pioneer Head Unit operation
Navigation mode :
Navigation operation
First of all, set the Operation mode switching
method. The Operation mode switching changes
in accordance with the settings as below.
❒
When using with the Pioneer AV Head Unit,
set to Setting A. If you wish to operate another
Pioneer Head Unit, set to Setting B. If you
wish to use Navigation operation only, set to
Setting C. (“Setting A” is default or factory set-
ting.)
Main mode and DIN mode operation
(1) NAVI/AUDIO button
Pressing this button switches the Operation
mode.
(2) VOICE button
You can use the VOICE button to start voice rec-
ognition, allowing you to operate the Navigation
System by speech.
(3) SRC (SOURCE) button
Switches between sources and switches power
ON/OFF. (Depending on the connected units,
operation may differ slightly. Refer to “Switching
the Sources” in the connected unit’s instruc-
tions.)
(4) 55
55
, ∞∞
∞∞
, 22
22
, 33
33
button
Operates the same as the Head Unit’s 55
55
, ∞∞
∞∞
, 22
22
,
33
33
button or the Joystick.
(5) BACK button
Main mode : BACK button
Return to the previous screen.
DIN mode : FUNCTION button
FUNCTION menu is displayed.
(6) A.MENU button
Main mode : AUDIO MENU button
Display the menu.
DIN mode : AUDIO button
AUDIO menu is displayed.
(7) Transmitter
This transmits the remote control signals.
Switching
method
Setting method
Setting A
Main mode
J
Navigation
mode
Press the
VOICE button
while pressing
the A.MENU
button.
Setting B
DIN mode
J
Navigation
mode
Press the BACK
button while
pressing the
A.MENU button.
Setting C
Navigation
mode only
Press the SRC
(SOURCE) but-
ton while press-
ing the A.MENU
button.
(1)
(2)
(4)
(5)
(3)
(6)
(7)