Pioneer AVIC-880DVD GPS Receiver User Manual


 
5
Chapter 1
How to Use Remote Control and Names of Parts
Chapter
1
How to Use Remote Control and Names of Parts
Preparing the Remote Control
Some navigation operations can be performed
with the Steering Remote Control provided.
Prior to using the remote control, refer to the fol-
lowing to install the battery.
Inserting the battery for the
Remote Control
The CR2032 (3V) lithium battery is used with the
remote control.
Steering Remote
When using the remote control for the first
time:
Pull out the film in between the cover and the
remote control.
When replacing the battery with a new one:
Remove the cover on the back of the remote con-
trol and insert the lithium battery with the posi-
tive side (+) up. When changing the battery, use
a probe with a fine non-metallic tip to remove the
lithium battery.
Keep the lithium battery out of reach of
children. Should the battery be swallowed,
immediately consult a doctor.
Do not recharge, disassemble, heat or dis-
pose of the battery in fire.
Use a CR2032 (3V) lithium battery only.
Never use other types of battery with this
unit.
Do not handle the battery with metallic
tools.
Do not store the lithium battery with
metallic materials.
When disposing of used batteries, please
comply with governmental regulations or
environmental public institution’s rules
that apply in your country/area.
Always check carefully that you are load-
ing the battery with its (+) and (–) poles
facing in the proper directions.
Remove the battery if remote control is not
to be used for a month or longer.
In the event of battery leakage, wipe the
remote control completely clean and
install a new battery.