Filter
Top Products
- 5 -
USE THE INCLUDED WIRE TAPS AND FOLLOW THE FOUR STEPS ABOVE TO SPLICE INTO THE TURN INDICATOR WIRES
7. Make sure the harnesses are routed securely to the bottom of the driver side door frame and enough slack is left for splicing.
8. Splice the RED wire from the driver side harness into the green with orange stripe wire previously labeled ‘driver side turn’.
9. Splice the RED wire from the passenger side harness into the orange with blue stripe wire
previously labeled ‘passenger side turn’.
10. Strip and twist together the ends of the black wires from both harnesses. Crimp them together in the supplied ring connector and ground to a
suitable nearby location on the metal framework of the vehicle.
11. Activate each turn indicator to verify that the Signal
®
mirrors are working.
12. Replace any door accessories, door panels, plastic moldings, and trim pieces.
1 2
3 4