Filter
Top Products
5
06-14-07
37)8
37)8
Programming the SWI-X to Control the Head Unit (cont.)
Step 21.
Release the button.
The right LED will turn
on.
Step 22.
Hold the IR emitter on the head
unit’s remote control within 3 to 4
inches of the IR Input on the SWI-
X. Press and hold the button to be
learned on the remote control.
The right LED will turn
off when the remote
button has been
learned.
Step 23.
Release the button on the remote
control.
The left LED will turn
on.
Step 24.
If you need to program more buttons,
repeat steps 20 - 23 for each additional
audio function on the steering wheel.
Once programming
is completed, wait 7
seconds. Both LEDs
ZLOOÀDVKWKUHHWLPHV
indicating end of
programming. The
,QWHUIDFHZLOOWKHQÀDVK
the version number it
was programmed for.
37)8
37)8
Step 20.
Within 7 seconds, press and
hold the button that is to be
learned on the steering wheel.
The left LED will turn
off when the button
has been learned.
37)8
Note: If the steering wheel control has a function that the head unit remote control does not have, you can program the steering
wheel function to operate any other command on the head unit remote control.
After all buttons are
programmed
Program
remaining buttons
VOL
VOL