Filter
Top Products
Black plate (137,1)
Model "Z12-D" EDITED: 2009/ 9/ 17
WARNING
. Make sure the hood is completely
closed and latched before driving.
Failure to do so could cause the
hood to fly open and result in an
accident.
. If you see steam or smoke coming
from the engine compartment, to
avoid injury do not open the hood.
SPA2607
When opening the hood:
1. Pull the hood release handle
*
1
located
below the instrument panel; the hood will
then spring up slightly.
2. Locate the lever
*
2
in between the hood
and grille, and push the lever sideways with
your fingertips.
3. Raise the hood
*
3
.
4. Remove the support rod
*
4
from the hood
and insert it into the slot
*
5
.
Hold the coated part
*
A
when removing or
resetting t he supp ort rod. Avoid direct
contact with the metal parts, as they may
be hot immediately after the engine has
been stopped.
When closing the hood:
1. Return the support rod to its original
position.
2. Slowly move the hood down to latch the
lock.
3. Push the hood down to lock the hood
securely into place.
HOOD
Pre-driving checks and adjustments 3-21