Filter
Top Products
Black plate (104,1)
Model "Z12-D" EDITED: 2009/ 9/ 17
4. Push the MENU button
*
1
again. The
display will switch to the minute adjustment
mode.
5. Push the TUNE or SEEK button to adjust the
minutes.
6. Push the MENU button again to exit the
clock mode.
The display will return to the regular clock
display after 5 seconds.
SIC4275
Type C
Type C
Push the ENTER SETTING button
*
1
until
“Setting Clock” and “On-screen Clock” appear
on the display. Then turn the TUNE/SCROLL
knob
*
2
to turn the clock on or off.
1. Push the ENTER SETTING button
*
1
until
“Setting Clock” and “Clock Adjust” appear
on the display.
2. Turn the TUNE/SCROLL knob
*
2
to adjust
the hour.
3. Push the ENTER SETTING button
*
1
.
4. Turn the TUNE/SCROLL knob
*
2
to adjust
the minute.
5. Push the ENTER SETTING button
*
1
.
The display will return to the regular clock
display after 5 seconds.
RESETTING THE TIME (Type B)
By holding down the MENU button and then
pushing the TUNE or SEEK button, the time will
be reset as follows.
. In case the displayed minute is in the range
of 00 - 29, the hour will stay the same and
the minute will be reset to 00.
. In case the displayed minute is in the range
of 30 - 59, the hour will be advanced by one
hour and the minute will be reset to 00.
For example, if the MENU and TUNE buttons are
pushed while the time is between “8:00” and
“8:29”, the display will be reset to “8:00”. If
pushed while the time is between “8:30” and
“8:59”, the display will be reset to “9:00”. At the
same time the display will return to the previous
audio mode.
2-30 Instruments and controls