Nissan 2010 Cube Automobile User Manual


 
6
CRUISE CONTROL (if so equipped)
To activate cruise control, push the CRUISE ON/OFF switch.
The CRUISE indicator light in the instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed,
push the COAST/SET switch and release.
To reset at a faster cruising speed, push and hold the ACCEL/
RES switch. When the vehicle attains the desired speed, release
the switch.
To reset at a slower cruising speed, push and hold the COAST/
SET switch. Release the switch when the vehicle slows to the
desired speed.
To cancel cruise control, push the CANCEL switch or tap the brake pedal.
To resume a preset speed, push and release the ACCEL/RES switch. The vehicle returns to
the last set cruising speed when the vehicle speed is over 24 MPH (38 km/h).
To turn off cruise control, push the CRUISE ON/OFF switch. The CRUISE indicator light in
the instrument panel will go out.
AUTOMATIC CLIMATE CONTROL (if so equipped)
01
AUTO BUTTON
Press the AUTO button
01
. Use the temperature control buttons
02
to set the desired
temperature. This will allow the fan speed, air flow distribution and temperature to be
automatically maintained at the selected temperature.
To disable auto mode, press the MODE button
03
, one of the fan speed control buttons
04
or the front defroster control button
05
.
02
TEMPERATURE CONTROL BUTTONS
Press the temperature control buttons
02
, up to increase the temperature or down
to decrease the temperature.
The temperature range is between 60°F and 90°F.
05
10
04
03
08 09
07
02 01
06