Filter
Top Products
HIGH BEAM
Ⅲ Push the headlight control switch forward to
select the high beam function. The blue
indi-
cator light illuminates. Pull the headlight switch
back to the original position to select the low beam.
The blue
indicator light goes off.
Ⅲ Pull and release the headlight control switch
to flash the headlight high beams on and off.
HEADLIGHT AIMING CONTROL SWITCH (if so equipped)
Depending on the number of occupants in the vehicle and the load it is
carrying, the headlights may be aimed higher than desired. If the vehicle
is traveling on a hilly road, the headlights may directly hit the rearview
mirror of the vehicle ahead or the windshield of the oncoming vehicle.
The light axis can be lowered with the operation of the switch.
Ⅲ With maximum/heavy loads, select position 3.
Ⅲ When traveling without a heavy load or on a flat road, select
position 0.
STEERING WHEEL SWITCHES FOR AUDIO CONTROL/
BLUETOOTHா (if so equipped)
Ⅲ Press the SOURCE button to turn the audio system on.
Ⅲ To choose AM, FM, XMா, CD or AUX press SOURCE
repeatedly.
Ⅲ Thetuning up or down
switch can beused to perform
the following:
● Push the
switch for less than 1.5 seconds to
change the radio frequency.
● Push and hold the
switch for more than 1.5 sec-
onds to seek the next or previous broadcasting radio
station.
● Push the
switch while playing a CD for less than 1.5 seconds to change tracks on
the CD.
● If the vehicle is equipped with a CD changer, push and hold the
switch for more
than 1.5 seconds to change between CDs.
Ⅲ Push the + or – control switch to increase or decrease the volume.
5