Filter
Top Products
BLUETOOTHா HANDS-FREE PHONE SYSTEM (if so equipped)
With an overhead microphone and sound
transmitted through the audio system
speaker, the Bluetoothா Hands-Free Phone
System utilizes Bluetoothா wireless technol-
ogy and voice recognition to provide hands-
free cellular phone communication.
SYSTEM OPERATING TIPS
Ⅲ Close all windows. Surrounding noises
may interfere with system operation and
performance.
Ⅲ Press the
button on the steering wheel to activate voice recognition.
Ⅲ Wait for the tone before speaking.
Ⅲ Begin speaking a command within 5 seconds of the tone.
Ⅲ To go back to the previous command, say “Go back” or “Correction.”
Ⅲ To cancel a voice recognition session, simply wait 5 seconds, say “Cancel”or “Quit,”or
press the
button.
Ⅲ To increase or decrease the volume of the voice prompts, press the + or – (volume)
control buttons on the steering wheel or turn the VOL knob on the audio system while
the system is responding.
Ⅲ Speak in a clear and natural voice without pausing between words.
Ⅲ If the Voice Recognition system does not recognize your voice commands, train the
system using the Speaker Adaptation Mode. Refer to your Owner’s Manual for a list of
commands and further instructions.
Ⅲ Some commands are not available while the vehicle is in motion.
Ⅲ The “Help” command can be used in any menu to hear a list of available commands.
Ⅲ Please refer tothe cellular phone manufacturer Owner’s Manual for detailed information
regarding your Bluetoothா phone.
Ⅲ For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth .
PAIRING YOUR PHONE
To use the hands-free feature, you need to set-up, or pair, the system to recognize your
compatible cellular phone(s). Five Bluetoothா-enabled phones can be paired. After set-up,
the system automaticallyconnects with apaired phone when theignition is in theACC or ON
position, as long as the phone is on and in the vehicle.
17