Nextar SNAP3 GPS Receiver User Manual


 
Global Positioning System
18
Tap the + or symbol to increase or decrease the
volume.
Then, click
at the upper right corner of the page
to save the setting and go back to the last page.
Battery
Tap Battery on the Setup submenu to check the
remaining power of your battery and/or choose the
idle time for power saving.
The Power page appears in the display.
Battery Status indicates the current status of
battery. When the battery of GPS device is being
charged, you see the indication of Battery Status :
Charging; when the battery of GPS device is fully
charged, you see the indication of Battery Status :
100%
Tap the right or left arrow to choose the idle time of
power. You can set a timer to automatically turn off
your device when it is idle for a set period of time.
The options include Never, 1 min, 2 min, 5 min, 10
min, and 15 min.
For power saving, you had better choose the idle
time. If you choose the idle time, the device will be
in the suspend mode at the time you set.
Then, click
at the upper right corner of the page
to save the setting and go back to the last page.