Nextar SNAP3 GPS Receiver User Manual


 
Chapter 1: Getting Started
3
Top and Bottom Views
Number Component Description
1 MiniSD Card Slot
Accepts a MiniSD card for accessing data, such as
MP3 music and photos.
2 MiniUSB Port
Connects through an AC adapter or USB cable to a
PC or a car charger socket.
3 Reset Key
Restarts your device (soft reset).
4 Battery Switch
The main power/battery cutoff switch.
Initially Switching ON the GPS
Use a stylus to slide the ON/OFF switch to the
ON position.
Then, your product will be turned ON. Connect the AC adapter as described below. Bear in mind to fully
charge the battery before using your product for the first time.
Caution
Always keep the ON/OFF switch in the ON position for normal
operation.