Nextar SNAP3 GPS Receiver User Manual


 
Global Positioning System
6
Step 4:
Push the car mount lock towards the sucking
disc to make the disc tightly suck the windshield
of your car.
Step 5:
Set the GPS product downwards and inward at
the degree of 15 towards 2 sides of lower hooks
of the car jacket; then, push the product
backwards to wedge the upper hook of the car
jacket.
Step 6:
The installation of the car holder is completed.
Connecting the Car Charger
The car charger supplies power to your device you are using in a car.
Caution
To protect your device against sudden surges in current, connect the car
charger only after the car engine has been started.
Follow the instructions below to connect the car charger to the car cigarette socket.
1. Connect one end of the car charger to
the power connector of your device.
2. Connect the other end to the 5V
cigarette lighter in the car to power and
charge your device. The indicator on
the car charger lights in green to
indicate that power is being supplied to
your device.