Filter
Top Products
Routes
Navigation
September 2008 NAVIGON 2000S | 2200T Series User’s Guide 71
NAVIGON, INC.
Navigation
After the route is calculated, you can begin navigation or view a simulation of the route.
Calculating and displaying routes
On the ROUTE PLANNING WINDOW:
1. Load a saved route.
- OR -
2. Enter a starting point and at least one route point.
3. Tap the
Show Route button.
The map opens in
Preview mode.
The starting point and the route points are marked by flags. For each stage, the
distance and the estimated trip time is given. This information is also displayed for
the entire route.
4. Tap the
Navigation button or simply start driving.
Viewing or Changing the Route Profile
The calculation of a route is based on route options.
On the R
OUTE PLANNING WINDOW:
1. Create a route or load a previously saved route.
2. Tap the Show Route button.
The map opens in
Preview mode and displays the calculated route.
3. Tap
the Route Profile button.
You can view and, if necessary, change any of the displayed options.
Note: Once options are changed, they remain in effect for all subsequent routes.
You can get information regarding changing individual route profiles by tapping the cor-
responding (Help) button.