Filter
Top Products
PAGE 44 — DCA-220SSJ/SSJU — OPERATION AND PARTS MANUAL — REV. #0 (02/04/14)
DCA-220SSJ/SSJU — GENERATOR OUTPUTS
Generator Amperage
Tables 8 and 9 describe the generator’s current output capa-
bility for both 1Ø-phase and 3Ø phase applications.
Generator Output Voltages
A wide range of voltages are available to supply voltage for
many different applications. Voltages are selected by apply-
ing jumpers (6) to the
voltage change-over board
(Figure 15).
To obtain some of the voltages as listed in Table 6 (see
below) will require a fine adjustment using the
voltage regu-
lator
(VR)
control knob
located on the control panel.
Voltage Change-Over Board
The
voltage change-over board
(Figure 16) is located on
the control box, behind the generator control panel. This
board has been provided for ease of voltage selection.
CAUTION - CHANGING VOLTAGES
NEVER attempt to place jumper plates on the
voltage
change-over board
while the generator is in operation.
There exist the possibility of
electrocution, electrical
shock or burn, which can cause severe bodily harm
or even death
!
Figure 16. Voltage Change-Over Board
elbaliavAsegatloV.7elbaT
esahPeerhT
)elbatceleS(
V802V022V042V614V044V084
esahPelgniS
)elbatceleS(
V021V721V931V042V452V772
sgnitaRerepmArotareneG.8elbaT
⎯⎯
⎯
⎯⎯
1
∅∅
∅
∅∅
WkV021V042
6143176
63003051
65764332
67436713
69008004
611669384
631631,1865
651003,1056
)xaM(671664,1337
sgnitaRerepmArotareneG.9elbaT
⎯⎯
⎯
⎯⎯
3
∅∅
∅
∅∅
AVKV042V084
520603
5480145
0644127
0786148
2879199
001142021
521103051
051163081
081334612
022925562