Filter
Top Products
GB - 3
The handsfree unit has the following jacks for connecting external units:
1. Socket for screen (D2) cable.
2. Microphone socket M1.
3. Socket for external speaker connection (3-6W, min 8 Ohm). When the external speaker is connected to socket 3, the
built-in speaker is switched off automatically.
4. Socket for SC2, SC3 or MB1 cables connection.
SCREEN (D2)
The screen unit includes:
1. LCD with big symbols and icons.
2. Convenient adjustable fixation system, which allows you to choose the best viewing position of the LCD.
3. Backlight with variable light colors and day and night mode.
MICROPHONE (M1)
The microphone is developed especially for in-car use. The location of the microphone significantly influences the acoustic
quality. For a recommendation on locating the microphone, see the “Installation” chapter.
The microphone has a 2 positional button for adjusting its sensitivity. Press the button on the microphone to increase the
volume to the other caller.
SYSTEM CABLES SC2 AND SC3 (Optional)
System cable SC2 connects the handsfree unit with the power supply and the ignition system and is used for muting the radio.
System cable SC3 is used for plug & drive installation. It provides power supply via the cigarette lighter.
Both system cables are supplied with changeable fuses. How to change the fuses is indicated in the illustration below.
1
2
3
4
If press:
- Receiving a call.
- Connecting with paired phone in Hands-
free or Headset profile.
If press and hold:
- Switching on pairing mode.
If turn Central button to the right or to
the left:
- Navigation in the Menu.
If press Central button:
- OK button.
- Opening the menu.
If press:
- Ending a call.
- Rejecting an incoming call.
- Returning to the previous level of the
menu.
- Deleting input data.
If press and hold:
- Returning to Standby mode.
m_BlueCompact_GB_.indd 3m_BlueCompact_GB_.indd 3 25.10.2006 15:17:4425.10.2006 15:17:44