English 87
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
However, if you have set the "Area" to "Reverse", the
audio source that is output at the AV OUTPUT terminal is
switched depending on the front sound source.
3 Switches the front and rear audio sources.
(This button appears when the Zone
function is On.)
Use "Reverse" to change over the front and
rear audio sources.
4 Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
5 Returns to the original screen.
⁄
• There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer.
- <Audio Setup> (page 64) and <Equalizer Control>
(page 85) are not available.